UK PDA Battery store >> PDA Batteries >> Replacement for MITAC PDA Battery

Replacement for MITAC PDA Battery: mitac pda battery form TopPower(UK). TopPower(UK) offers a complete line of MITAC pda batteries and mitac repated products for most mitac pda .

Please Press 'Ctrl + F' to locate your drill battery number or Machine Model.

Select the following part numbers of MITAC PDA Battery
BP-LP1230 BP8CULXBIAP1 E3MT041202B12A E3MT11124X1
LIP 1298MIPT
Select the following model numbers of MITAC PDA Battery
Mio A201 Mio A701 Mio P350 Mio339
Mio558 P4QMio558
MITAC PDA Battery Articles & Tips
Upgrade my MITAC PDA Battery from Ni-MH to Li-ion
How can I maximize the performance of my MITAC PDA Battery?
What is the run time of TopPower's PDA Battery?
MITAC PDA Battery Articles & Tips

Upgrade my MITAC PDA Battery from Ni-MH to Li-ion

Ni-Cd, Ni-MH and Li-Ion MITAC PDA Battery are all fundamentally different from one another and cannot be substituted unless the PDA has been pre-configured from the manufacturer to accept more than one type of battery chemistry. Please refer to your manual to find out which rechargeable battery types the laptop device supports or use our MITAC Battery Finder above to find all the compatible PDA Battery for your device. It will automatically list all of the battery chemistries supported by your specific device. If your device does allow you to upgrade the battery from Ni-MH to Li-ion, you will typically get longer run times.

For example, if your PDA uses a Ni-MH battery that is 9.6 Volts, 4000mAh and the new Li-ion PDA Battery is 14.4 Volt, 3600mAh, then you will obtain longer run time with the Li-ion battery.

Example.

Li-ion: 14.4 Volts x 3.6 Amperes = 51.84 Watt Hours
Ni-MH: 9.6 Volts x 4 Amperes = 38.4 Watt Hours
The Li-ion is stronger and has longer run time.

Click here for information on calculating MITAC PDA Battery run time.

How can I maximize the performance of my MITAC PDA Battery?

There are several steps you can take to help you get maximum performance from your PDA Battery:

Prevent the Memory Effect - Keep the PDA Battery healthy by fully charging and then fully discharging it at least once every two to three weeks. Exceptions to the rule are Li-Ion batteries which do not suffer from the memory effect.

Keep the MITAC Batteries Clean - It's a good idea to clean dirty battery contacts with a cotton swab and alcohol. This helps maintain a good connection between the battery and the portable device.

Exercise the Battery - Do not leave the battery dormant for long periods of time. We recommend using the battery at least once every two to three weeks. If a PDA Battery has not been used for a long period of time, perform the new battery break in procedure described above.

Battery Storage - If you don't plan on using the PDA Battery for a month or more, store it in a clean, dry, cool place away from heat and metal objects. Ni-Cd, Ni-MH and Li-ion batteries will self-discharge during storage; remember to recharge the batteries before use.

What is the run time of TopPower's PDA Battery?

MITAC PDA Battery have two main ratings on them: Volts and Amperes. Because size and weight of PDA Battery is limited when compared to larger batteries such as car batteries, most companies show their ratings with Volts and Milliamperes. One thousand Milliamperes equals 1 Ampere. When buying a battery, select batteries with the most Milliamperes (or mAh). Batteries are also rated by Watt-Hours, perhaps the simplest rating of all. This is found by multiplying the Volts and the Amperes together. For example:

14.4 Volts, 4000mAh (Note: 4000mAh is equal to 4.0 Amperes).

14.4 x 4.0 = 57.60 Watt-Hours

Watt-Hours signifies the energy needed to power one watt for one hour. This MITAC PDA Battery can power 57.60 watts for one hour. If your PDA runs at 20.50 watts, as an example, this PDA Battery could power your PDA for 2.8 hours.

Understanding your MITAC Battery Needs

We strive to make you MITAC PDA Battery purchases easy. Since we understand that finding the right MITAC batteries for your needs can be overwhelming and confusing at times we developed a PDA Battery finder tool to help find the right size for the make and model of your equipment. We also offer educational articles and tips to help you conserve your MITAC batteries and understand common problems. By us providing education you are able to make the right purchasing decisions as well as provide proper care for all of your electronics.