UK Battery Charger store >> Battery Charger >> BRAUN Battery Charger suitable for BRAUN

Please Press 'Ctrl + F' to locate your drill battery number or Machine Model.

Use our cross-reference information to choose the correct BRAUN Battery Charger on Toppower(UK) Shipping. select high quality and lower price BRAUN battery charger part NO. or the machine NO. bellow:
This is also compatible with the following models of BRAUN
105 105 Quartz Date 70-F
AP 360 IX Date Micro SM Mini AF-P
S-110 S-120 S-135
S-60 S-70 Trend Micro SM
Trend Mini AF-P Trend Zoom 105 Trend Zoom 105 Quartz Date
Trend Zoom 70-F Trend Zoom AP 360 IX Date Trend Zoom S-110
Trend Zoom S-120 Trend Zoom S-135 Trend Zoom S-60
Trend Zoom S-70

BRAUN Battery Charge Tips

1. If your BRAUN battery can not charge with our BRAUN battery charger, what is matter with the charger?

I think there is some electrical contact problem in your BRAUN charger and you can fix it yourself in a few minutes.

(1). Remove your BRAUN charger from the DC adapter.
(2). There are two hooks at the bottom of the BRAUN charger.
(3). Your can release the top charging plate by pushing the hooks with two fingers.
(4). The top charging plate will release from the top.
(5). At the bottom of the charging plate, there will be three metallic contacts.
(6). Try pulling all the contacts so that it will avoid the bad connection.
(7). Slowly re-insert the charging plate to the charging base.
(8). Re-connect the DC adapter and your BRAUN charger should work.

Good luck and if there is still other problem, please don't hesitate to send us a mail again.

2. What does the light indicator mean when charging BRAUN battery ?

(1).Plug the AC power adapter in a wall outlet.
(2). Connect the AC Power adaptor supplied with BRAUN charger to the DC in jack.
(3). "Status" indicator shows RED when the BRAUN charger is ready and "Charger" indicator shows flashing Green when waiting for battery pack.
(4). Slide BRAUN battery pack in the charger and "Charger" indicator goes RED when charging.
(5). "Charger" indicator show RED and GREEN alternatively when BRAUN battery pack has more than 90% charged.
(6).When the BRAUN battery pack is fully charged, the "Charger" indicator shows a steady green.
(7). After the BRAUN battery pack fully charged, slide the battery pack out.
(8). Unplug DC power, "CHARGE" and "STATUS" indicators go out.

3.How to Test a BRAUN Battery Charger

Whether you're unsure that your BRAUN battery charger is working properly. Running a test on you BRAUN battery charger is an easy process to solve this problem.

(1).Plug in your BRAUN charger to an electrical outlet. Remove any batteries you may have charging in the unit.

(2).Turn on your voltmeter unit. Be sure there's power getting to the meter. Plug in the test probes into the voltmeter according to the meter's instructions. Set the selector switch to the highest level for DC Volt or whatever is recommended in the meter's instructions.

(3).Take a battery or battery pack that's compatible to your battery charger. Make sure the BRAUN battery has no corrosion and is not leaking fluid. Touch the positive end of the battery with the red probe. Take the black test probe and place it on the negative side of the battery.

(4).Check the readout on the voltmeter and see where the pointer is indicating to. If it's on the left side, or negative side, switch the test probes. If it's on the right side, it will show that the BRAUN battery is receiving some charge. Where it points to on the meter will determine how much charge it received.

(5).Check the BRAUN battery charger to see how much power it's giving off, if you continue to receive a negative reading from the batteries. A negative reading will indicate a bad battery charger, and you should replace it. If the charger has sufficient amount of power flowing through it, it's more than likely the BRAUN batteries are bad and just won't hold a charge.